The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Feb 13, 2015

• #21

Plug can be dismantled and push tags crimped a bit tighter, but if it has overheated thatwont work. Replace crimps or complete connector assy.

 

Marmaduke

Well-Known Member

• Feb 13, 2015

• #22

You should have a little spring jobber on the back of the alternator like the one in the picture that will hold the wires in place



If it's missing PM me your details and I'll post you this one before I put the whole engine on ebay

 

border

Well-Known Member

• Feb 13, 2015

• #23

Marmaduke said:

You should have a little spring jobber on the back of the alternator like the one in the picture that will hold the wires in place



If it's missing PM me your details and I'll post you this one before I put the whole engine on ebay

Click to expand...

Cant see one Mate, will have a good look tomorrow,to be honest I am just feeling about for things as cant really get to the alt, will let you know Mate. Thanks Very Much

 

Marmaduke

Well-Known Member

• Feb 13, 2015

• #24

No worries, I've just noticed that yours is a 200tdi and this is off a 19j but have a good look and if you want it let me know

 

border

Well-Known Member

• Feb 13, 2015

• #25

Will Do Thanks Again

 

border

Well-Known Member

• Feb 13, 2015

• #26

Just had a look and theres definatly not one there, also cant seem to see or feel the holes that it would fit in, the alt looks quite New but the plug is the old one, not sure if this will make a difference on the new alt?

 

Marmaduke

Well-Known Member

• Feb 13, 2015

• #27

Give MHM's suggestion and see if that improves the connections

 

flat

Well-Known Member

• Feb 13, 2015

• #28

sp00k said:

Just had a look for my order and I replaced mine with one of these in Aug 2013. Not had any bother from it:

BRAND NEW ALTERNATOR 12V VOLT 75 AMPS LUCAS A127 STYLE PINTO/LEYLAND LEFT HAND | eBay

Think it's a left hand one needed. I actually ordered a right hand one, so I had to dismantle it and rotate it to make it left hand but please double check as mine is non-standard!

Click to expand...

I brought this when my alternator went south and it's been good so far.

Sounds to me like alternator is fecked, easy to change

 

border

Well-Known Member

• Feb 14, 2015

• #29

Dont want to speak to soon, but Crimped spades a bit tighter as M H M said untill the plug was tighter fit and it started charging at 14 .2 straight away, give it a short run out now its on 13.99 to 14 so hopefully this might have sorted it, will get one of these and fit it too 3 PIN TERMINAL PLUG LUCAS ACR BOSCH ALTERNATOR CLASSIC CAR | eBay sure it is the same fitment.
Thanks Everyone for advice really appreciated. Dont know what Id do with out the help from people on here.

 

Last edited: Feb 14, 2015