Jonnyb1990
Well-Known Member
Wheres the intake for the Turbo ?
Seen a few bodge jobs on conversions,
If your going to do it well,
Stencil on the right wing where in intake should be,
Cut out and fit snorkal,
Finish will depend on what tools you have access to,
Thats how I would go about it,
Or you can go from the only free top vent on the wing,
Doesnt look as good imo and uses more material, But maybe an easier alternative
Seen a few bodge jobs on conversions,
If your going to do it well,
Stencil on the right wing where in intake should be,
Cut out and fit snorkal,
Finish will depend on what tools you have access to,
Thats how I would go about it,
Or you can go from the only free top vent on the wing,
Doesnt look as good imo and uses more material, But maybe an easier alternative
If you have no side vent then i would go through the wingtop.
Looks much better imo
not many people do it this way.
Plus you don't have to cut holes into the side panel. Also you don't have to mess around with inner wings and all the worries of getting the wing piece to seal to the outer etc.
Just get a longer piece of 2" flex pipe and go straight from the bottom of snorkel through wing top grill and into air box.
Looks much better imo
not many people do it this way.Plus you don't have to cut holes into the side panel. Also you don't have to mess around with inner wings and all the worries of getting the wing piece to seal to the outer etc.
Just get a longer piece of 2" flex pipe and go straight from the bottom of snorkel through wing top grill and into air box.
DefenderLuke
Active Member
If you have no side vent then i would go through the wingtop.
Looks much better imo
Plus you don't have to cut holes into the side panel. Also you don't have to mess around with inner wings and all the worries of getting the wing piece to seal to the outer etc.
Just get a longer piece of 2" flex pipe and go straight from the bottom of snorkel through wing top grill and into air box.
Excellent thanks! Any tips of where and what snorkel to buy?
Luke
DefenderLuke
Active Member
Did you cut out and bolt through the wing?
DefenderLuke
Active Member
drewster
Well-Known Member
IMO the best one is Southdown even if you have to cut into the wing it sits inboard of the car is made out of steel and will take a billody big bash from a tree and still work un like others on the market
One other thing to remember is you must seal all pipes with tiger seal
One other thing to remember is you must seal all pipes with tiger seal
Just googled it and they come up at 246 quid
Mine was 60 posted, must be a different one you are talking about, is it plastic or steel?
DefenderLuke
Active Member
There's mine and mines a 90 with 200tdi conversion
Mine doesn't have the hole cut in the side only on top? How did you fit yours?
Luke
This is my defender
That snorkle on fleabay is 246 quid , so did you get a cheap copy or am I looking at the wrong one
