Grit Valve
2000 4.6 Vouge
Hi wammers got me nano now
It's been fine lately trips to and fro to work apart from today typical .
Right well I've upped the idle for now to 129 both lift needle and cps remain at a steady 750.63
ECM faults
Immobiliser link fault I assume that's my unplugged alarm from fuse box .
Fault codes are rpm =33 yet cps and lift sensor are working as above
And water temp 207 current!
now I assume that's the ecu temp gauge but what I don't understand it the engine temp is registering 90 once warmed on nano readings so something's adrift there, I got a new spare green water temp sensor in me shed I swap that over and take it from there
Thoughts please.
It's been fine lately trips to and fro to work apart from today typical .
Right well I've upped the idle for now to 129 both lift needle and cps remain at a steady 750.63
ECM faults
Immobiliser link fault I assume that's my unplugged alarm from fuse box .
Fault codes are rpm =33 yet cps and lift sensor are working as above
And water temp 207 current!
Thoughts please.