No that I haven't check .
That I will do leader today
Is it on to right hand site ore the left
Is it not serviceable at all wammers?No L/H side at base of A post behind trim. Do NOT play with height switch it is full of electronics and seriously expensive to replace with a new one. If that is duff second hand is the only real option.
Is it not serviceable at all wammers?
Good morning sir!![]()
Holy pot of gold batman!!!
I take it the switch being the command and the lights indicate a return signal from the height sensors or suspension ECU?
LHDAre you LHD or rhd?![]()
They give a solid at lamp and a flashing going to lamp. That must be signalled by the ECU and switched by it. As there is only the ECU that knows when a selected height has been achieved. So the interface selector switch to ECU is a good shout and that is the plug at base of L/H A post.
okay
have you ever tried to measure on the weir there goes into the switch