Stuballsed

New Member
Can anyone please tell me what the hose is in the attached. Can't figure out where it goes or what it's for. It's been rubbing on an injector pipe clip and has got a hole in it.

Cheers
 

Attachments

  • 100_0199.JPG
    100_0199.JPG
    43.4 KB · Views: 293
  • 100_0200.JPG
    100_0200.JPG
    28.9 KB · Views: 296
That's the pressure pipe from the turbo that increases the fueling when the turbo is blowing, it runs around the back of the engine and you should see it connected to the output of the turbo.
I'm guessing the power on your 300tdi is a tad lacking at the moment as it is most likely fuel starved once the turbo is blowing.
 
Last edited:
Looks like its ERR4699 ....

Dude, welcome to LandyZone and thank you. Just ordered that part. However, if your wrong, (cost me £25) I want one of your sisters (assuming age of consent reached naturally!)

p.s. If no sisters, I will except whatever else you got, with a heartbeat.
 
ERR4699 is the boost pipe assembly on the 300 TDi, so your sisters should be ok!

It runs from the turbo, around the back of the engine to a banjo bolt. Suspect any rigid plastic pipe of the right diameter would do the job - replaced part of mine with aquatic tubing when I accidentally melted it, and seems to work just fine:eek:
 
Did you glue the pipe? or replace the entire rigid pipe? Just curious as I guess it gets quite warm and also oily with the amount of leaks the average tdi has ;-)
 
Used a straight ribbed plastic connector - Halfords - about £1.29

Pushed the existing tube over one end, and the replacement bit over the other

Was a tight fit, and no sign of leakage (yet)!
 
Used a straight ribbed plastic connector - Halfords - about £1.29

Pushed the existing tube over one end, and the replacement bit over the other

Was a tight fit, and no sign of leakage (yet)!

SH ignoring the bit about Halfords I think you may have written a condom instruction manual ... straight ribbed ... pushed the existing tube over one end ... was a tight fit and no sign of leakage!
Ooh er matron :D:D
 
I think you may have written a condom instruction manual ... straight ribbed ... pushed the existing tube over one end ... was a tight fit and no sign of leakage!
Ooh er matron :D:D


Always thought the tighter the fit the better :eek:


Thanks Andy - made me smile:D
 
From me, Andy or both?!?


Oh, and by the way Cwazy

:nopics:

But maybe pics of your sis on LZ isn't the way to go? :confused:

Lol, I was referring back to

Dude, welcome to LandyZone and thank you. Just ordered that part. However, if your wrong, (cost me £25) I want one of your sisters (assuming age of consent reached naturally!)

p.s. If no sisters, I will except whatever else you got, with a heartbeat.


Not sure my sister would take to kindly to me posting her pics on forums ;-)
 

Similar threads