papasmurf123

New Member
right I HAVE used the search and I think its the servo .................but before I go out and buy 1 I need another opinion
The problem is if I press the brakes once all is good but if I press more (without revving ) all goes hard (the pedal) and I have to stamp hard to stop .
So what do you all think

Rob
 
You might be losing vacuum pressure from the pipes, the small one off the tee usually perishes or your vacuum pump may be fubar.
 
I have fixed it ( I hope)
on the pipe that goes from the vac pump to the servo there is a T on to a smaller pipe this was split but where does the smaller pipe go to and whats it for :)

Rob
 
The small pipe goes into the heater unit and operates some flaps, but only on air con models I think.
 

Similar threads