gazza1591 · Sep 19, 2014

Hi all

Just wondering if anyone has chequer plated there floor in the front of there disco one? My discovery came from a farmer who has removed the carpet from the drivers side and just has the sound proof in place so was thinking I may rip that out as it's wet and stinks, and replace with a false floor?

If anyone has done it any pics and did you make the plate or buy it precut if so where from?

markSX · Sep 19, 2014

I'm sure I saw it done in this thread, but it is a loooooooong thread so may take some finding.
http://www.landyzone.co.uk/lz/f8/auf_wiedersehen_pets-build-thread-206921.html

auf_wiedersehen_pet · Sep 20, 2014

poacherman · Oct 3, 2014

Well done proper nice that

Giantswood · Oct 4, 2014

Wonder if templates are available for those ?

auf_wiedersehen_pet · Oct 4, 2014

Giantswood said:
Wonder if templates are available for those ?

You need card, scissors, 10 minutes and a cuppa!

gazza1591 · Oct 4, 2014

i bought some plate and tried all sorts to get it to shape with no luck i made a template first and marked out on the plate but ended up with a right mess so back to drawing board

auf_wiedersehen_pet · Oct 4, 2014

Try it in stages. Bung a big bit of card with a straight edge onto the plastic door trim. Get another piece with a straight edge and slide it up to the seat box. Tape the first and second piece together, etc.

gazza1591 · Oct 4, 2014

i got the shape of the footwell out of card, i meant when i came to cut the plate i could not find any tool to cut it very god and when i did the lines were all off

auf_wiedersehen_pet · Oct 4, 2014

gazza1591 said:
i got the shape of the footwell out of card, i meant when i came to cut the plate i could not find any tool to cut it very god and when i did the lines were all off

1mm cutting disc and a steady hand for 90% of it.

gazza1591 · Oct 4, 2014

tried that and was not good lol will have to either play at getting better or pay someone to do the job lol

Giantswood · Oct 4, 2014

auf_wiedersehen_pet said:
You need card, scissors, 10 minutes and a cuppa!

It was worth a try

auf_wiedersehen_pet · Oct 5, 2014

Giantswood said:
It was worth a try

Whereabouts on the Cheshire/Staffs border are you?

gazza1591

Active Member

markSX

Active Member

auf_wiedersehen_pet

Well-Known Member

poacherman

New Member

Giantswood

Active Member

auf_wiedersehen_pet

Well-Known Member

gazza1591

Active Member

auf_wiedersehen_pet

Well-Known Member

gazza1591

Active Member

auf_wiedersehen_pet

Well-Known Member

gazza1591

Active Member

Giantswood

Active Member

auf_wiedersehen_pet

Well-Known Member

Similar threads