meego

Well-Known Member
Just about to start welding my Disco 2. Apart from battery neg, should I disconnect anything else.?? ECU for example. I don’t want to fry anything :eek:
 
I've seen two cases when the BCU failed after welding but then the owners didnt disconnect the battery so maybe with battery disconnected it might not be a problem
 
Welding up a failed window-glass riser buggered my OEM alarm and remote door-locking on my Merc 500.
Got it replaced under warranty....... luckily.
 
I've seen two cases when the BCU failed after welding but then the owners didnt disconnect the battery so maybe with battery disconnected it might not be a problem
Cheers SF. I usually just disconnect the negative, but never welded anything with as much electronics as a D2. Will have to just give it a go and cross my fingers. I might take the engine ECU out as an extra precaution.
 
Got one leg done today.
7B65DD32-8006-4FC5-ADA1-85DD99CEF562.jpeg

9433AB7C-ADC6-4933-8921-F61575920343.jpeg

4D187BC7-52FE-45F9-837B-376990317949.jpeg

096FCFF1-5A25-4B4A-9EE0-3AF0486D47DB.jpeg

624C0A1C-04E0-49F7-BEF9-F0123D5248BF.jpeg

34AD0061-F0C2-4EBE-ABA3-E926F81161E2.jpeg
34AD0061-F0C2-4EBE-ABA3-E926F81161E2.jpeg

I’ll get the offside done tomorrow. Got rid of of the towing eyes. Bloody pointless.
 
youve not done a bad job there
Cheers James. Cut all the worst of the rust out. When you get into the guts of the chassis, you see why they rot. It’s got multiple layers and rust forms between them. Really bad design.
 
Cheers James. Cut all the worst of the rust out. When you get into the guts of the chassis, you see why they rot. It’s got multiple layers and rust forms between them. Really bad design.
yes thats very true,still youve cut it out
 
Extensive welding done on both rear chassis legs. As said, disconnected battery negative lead only and removed the engine ecu. All back together now and everything's working fine. MOT next Friday, the 13th :eek:.
 

Similar threads