gfromleeds

Well-Known Member

• Feb 9, 2014

• #1

Im having a bit of trouble finding a suitable hole/gromit to thread some wires from the cabin to the engine bay
Anyone know of a easy access route for this
Its only for 2 low current wires for warning lights

 

wammers

No longer with us, RIP

Donater

• Feb 9, 2014

• #2

gfromleeds said:

Im having a bit of trouble finding a suitable hole/gromit to thread some wires from the cabin to the engine bay
Anyone know of a easy access route for this
Its only for 2 low current wires for warning lights

Click to expand...

Just leave the warning lamps you don't need off and forget about it. Some people do like to play.

 

gfromleeds

Well-Known Member

• Feb 9, 2014

• #3

Lol if you were here you'd know what I were on about
The two eldest daughters are here and theve brought there kids between them there's 4 kids all under 4 ransacking the house
I need to find something to do before I go mad lol

 

Last edited: Feb 9, 2014

wammers

No longer with us, RIP

Donater

• Feb 9, 2014

• #4

gfromleeds said:

Lol if you were here you'd know what I were on about
The two eldest daughters are here and theve brought there kids between them there's 4 kids all under 4 ransacking the house
I need to find something to do before I go mad lol

Click to expand...

There are loom entry points at either end of the scuttle. And the heater pipes rubber grommet, but don't fancy your chances of retrieving a wire pushed through any of them without a major trim removal. So play with the kids you know it makes sense.

 

gfromleeds

Well-Known Member

• Feb 9, 2014

• #5

Found one under driver footwell it came out behind the radiator bottle
Pushed threw with a unfolded wire coat hanger then taped the wire to the end and pulled it through job done so...
Im gona screw the dash back together then take the dog for a walk to the pub!
(Thats the furry four legged one not the slightly taller two legged one) shhh dont tell her lol

 

Last edited: Jun 19, 2014