davek0974 Well-Known Member Aug 16, 2010 #42 Got the torque setting idea. I take it that the locking bar just bolts on to the pulley with the 4 bolts??
Got the torque setting idea. I take it that the locking bar just bolts on to the pulley with the 4 bolts??
T terryds Member Aug 16, 2010 #43 Check out the Difflock guide. The pictures are very helpful. They also sell the cheapest crank pulley holding tool.
Check out the Difflock guide. The pictures are very helpful. They also sell the cheapest crank pulley holding tool.
davek0974 Well-Known Member Aug 16, 2010 #44 Seen it but with a garage full of milling machines, lathes and drills, aint no way i'm buying the tool
Seen it but with a garage full of milling machines, lathes and drills, aint no way i'm buying the tool
steveo999 New Member Aug 17, 2010 #45 Yep I just used the 4 bolts from the puller set to go into the threaded holes and used the puller for the template, with a big hole 40 odd mm to get a 27mm socket throught the middle.
Yep I just used the 4 bolts from the puller set to go into the threaded holes and used the puller for the template, with a big hole 40 odd mm to get a 27mm socket throught the middle.
davek0974 Well-Known Member Aug 18, 2010 #46 Started collecting bits, got the viscuous fan spanner and a couple of wading plugs to make the flywheel lock pin, both on the fleabay £11 the lot
Started collecting bits, got the viscuous fan spanner and a couple of wading plugs to make the flywheel lock pin, both on the fleabay £11 the lot
