J

JRNORWAY

Active Member
Does anyone know the pitch and size of bleed nipples for the 98-00 Freelander?

AFAIK for 2001+ models they are 10x1 and are they all the same?

Cheers
Jan
 
JRNORWAY said:
Does anyone know the pitch and size of bleed nipples for the 98-00 Freelander?

AFAIK for 2001+ models they are 10x1 and are they all the same?

Cheers
Jan
Click to expand...

i cnt answer your question but would like to no myself as mine are all rusty and horrid so replacing sounds a good idea
 
Mine are all rusty as well. Gonna change my brakes this weekend so need to get some new ones. I will buy a set with different sizes if i cant find out here. Will let you know the correct size then.
 
I got my hands on some bleed screws for the FL now. There are different front and rear screws. Both are 10x1mm, but different angle(?) or something. They just had the front ones. Will get the rear ones tomorrow.

Front ones are 34,3mm and rear ones 34,0mm. Will take some measurements over the weekend.
 
10x1mm 34mm = rear
10x1mm 30mm = front

4urk.jpg
 
According to Microcat all bleed nipples, front/rear, pre 2001/post 2001, are part number RTC115:confused:
 
Last edited:
It is possible i have got the wrong ones. I just gave my reg plate nr to a big car parts store/chain here in Norway and this was what they/datasystem recommended.

The saga continuous...
 
You must log in or register to reply here.

Similar threads

xDParis64
Unable to bleed brakes
Replies
4
Views
234
pwood999
pwood999
F
Freelander 1 Parts Catalogue
Replies
2
Views
120
FrINlander
F
A
FL1 rims hitting brake calipers !!!
Replies
15
Views
701
GrumpyGel
GrumpyGel
S
Front caliper bleed nipples
Replies
2
Views
804
andyfreelandy
andyfreelandy
B
1 pin temp sensor part number
Replies
3
Views
192
Bootoo72
B