I

ironhorse

Active Member

• Oct 3, 2011

• #1

Can this be right the thrust bearing has very little travel before it hits the plate

 

Attachments

• 
  PA030001.JPG

  38.3 KB · Views: 183
• 
  PA030002.JPG

  32.4 KB · Views: 196
• 
  PA030003.JPG

  31.8 KB · Views: 170
• 
  PA030004.JPG

  30.5 KB · Views: 186

jamesmartin

Well-Known Member

• Oct 3, 2011

• #2

they dont have ,what part number was clutch kit,

 

I

ironhorse

Active Member

• Oct 3, 2011

• #3

On the in
voice is says STC8358B

 

I

ironhorse

Active Member

• Oct 3, 2011

• #4

This is the second clutch , the first clutch the same, but the pedal would only go 3/4 way down before it stopped dead, and clutch was not releasing fully but was traveling as far as it could

 

jamesmartin

Well-Known Member

• Oct 3, 2011

• #5

right number , they dont have much clearance if any

 

I

ironhorse

Active Member

• Oct 3, 2011

• #6

I could see the slave strain because it could push no further