angeloc

Well-Known Member

• Jun 4, 2012

• #21

Kwik fit do the whole job inc filter and fully synth Mobil 3000 oil - 6 litres ! All in for £34

 

D

dog-man

Active Member

• Jun 4, 2012

• #22

Car now running much quieter and smoother.




dog-man

 

Hippo

Lord Hippo

• Jun 4, 2012

• #23

Bolts to remove on s standard guard for new peeps viewing this:

 

Hippo

Lord Hippo

• Jun 4, 2012

• #24

New boot on the front prop shaft:

http://www.landyzone.co.uk/lz/f9/prop-sorted-162093.html

 

teddywood1

Well-Known Member

• Jun 4, 2012

• #25

this post reminded me to finish of my project the plastic part on the "engin protector" I got some alloy 5 bar or is it 4 bar but coman name is checkered and shaped it the same as the plastic then I need to put some brakets on with heavy duty rivnuts on then bolt the checkered plate on so next time I do a oli change it is a matter of taking four bolts out as well as having a better engin protector I will take some photos whether i can get them on the site is a differebnt matter

 

Hippo

Lord Hippo

• Jun 4, 2012

• #26

If yer need help with pic's let me know. We likes pics.

 

Sucram

Active Member

• Nov 1, 2013

• #27

Hippo said:

Bolts to remove on s standard guard for new peeps viewing this:

Click to expand...

I've just bought the same type of under tray as in Hippo's photos above. My question is I need to buy some new mounting bolts as I don't have any that fit. I can see I need six of one size and two smaller ones. Does anyone know the correct size, thread pitch and length so I can go to a bolt shop and buy some.

Any help is much appreciated.

 

Irishrover

Well-Known Member

• Nov 1, 2013

• #28

The bolts are non standard as the hex. head is smaller than a normal metric bolt however the threads are standard.

4 bolts (2 per side at the rear to Subframe) M8 X 30 mm long
2 bolts to thin brackets attached to plastic tray to subframe crossmember M8 X 20mm long
2 bolts at front fixing M10 X 30mm long
6 flange head self tapping screws for front of tray

 

Sucram

Active Member

• Nov 1, 2013

• #29

Irishrover

Thank you very much for the info that's a great help, hopefully I'll be able to get the under tray mounted this weekend now

 

smnbyt

Active Member

• Nov 1, 2013

• #30

angeloc said:

Kwik fit do the whole job inc filter and fully synth Mobil 3000 oil - 6 litres ! All in for £34

Click to expand...

Do they drain the oil or use one of those hoover things?

 

Irishrover

Well-Known Member

• Nov 1, 2013

• #31

Irishrover said:

The bolts are non standard as the hex. head is smaller than a normal metric bolt however the threads are standard.

4 bolts (2 per side at the rear to Subframe) M8 X 30 mm long
2 bolts to thin brackets attached to plastic tray to subframe crossmember M8 X 20mm long
2 bolts at front fixing M10 X 30mm long
6 flange head self tapping screws for front of tray

Click to expand...

:behindsofa:

The first time I removed the undertray I decided to throw away the rusted original rubbish bolts and replace them with normal stainless steel bolts. Gave the threads a coat of copper grease before reassembly and put stainless washers on them..Never had a problem removing them. I also replaced the flange head self tappers with stainless, from memory I think they were size no. 6 X 20mm long-again no rust problems.