"Austin Shackles" <austinNOSPAM@ddol-las.net> wrote in message
news:3a3ks1lhgo0qjvtbh1vd8ca8d4tasn5mr4@4ax.com...
> On or around Fri, 13 Jan 2006 20:12:33 +0000 (UTC), "Andrew Mawson"
> <andrew@no_spam_please_mawson.org.uk> enlightened us thusly:
>
> >Anyone on the newsgroup using biodiesel - commercial or home
brewed?
> >If so I'd be interested in their experiences with this stuff. (or
SVO
> >'straight vegetable oil')
>
> I enquired of a local company that are reprocessing chip oil etc.,
but the
> price is not really better than dinodiesel and the supply situation
sounded
> too iffy to rely on. You may have better suppliers in your area. I
quite
> like the idea of having a supply at home, though, and that's worth a
few
> quid. But then again, I could get a tank and have dinodiesel
delivered in
> 1000l loads, as well, and probably not pay any more.
>
> nice idea in theory, ATM, here.
> --
> Austin Shackles. www.ddol-las.net my opinions are just that
> "Where they make a desert they call it peace" Tacitus (c.55 -
c.117)
> Agricola, 30
Googling around for a few days it seems if you are prepared do do a
bit of plumbing, it is fairly straightforward to convert either new or
used vegetable oils to biodiesel. In essance (though not quite as
simple as this) you mix in the correct quantities of sodium hydroxide
and methanol, which have been reacted together. You then let the
gylcerin settle out, draw off the biodiesel and wash it to remove
traces of methanol & sodium hydroxide. With care and forethought it
seems emenantly do-able. The glycerin is apparently biodegradable and
can be disposed of safely by composting unless you want to make large
quantities of soap !
When produced it would seem that you can treat it exactly like normal
'fossel fuel' diesel with the one caveat that is is a good solvent for
rubber based items like hoses, so if yours are neoprene you are ok,
but if natural rubber they need to be changed. If you produce it and
intend to use it on the road you notify HMC&E who send you an
appropriate form and charge you tax proportional to your production.
As my application is for a stationary generator this doesn't apply.
A very useful reference:
http://www.biodieselcommunity.org/
There is also a Yahoo biodiesel group.
AWEM