Whilst rebuilding my gearbox cooler lines, I lost some fluid during the process.
Once I completed the rebuild I loosened the gearbox fill plug to top up an was promptly coved in fluid.
Thinking maybe it was becauwe it hadnt been run for a while I started the car and cycked it through the gears and rolled it forwards and backwards. Gearbox still cold I popped the top up plug again and was ****ed on again.
Sooo, any ideas what im doing wrong. Or am I best just dropping all fluid out and starting again.
Throughout process, gearbox was cold and car had levelled itself in the highest suspension height.
Once I completed the rebuild I loosened the gearbox fill plug to top up an was promptly coved in fluid.
Thinking maybe it was becauwe it hadnt been run for a while I started the car and cycked it through the gears and rolled it forwards and backwards. Gearbox still cold I popped the top up plug again and was ****ed on again.
Sooo, any ideas what im doing wrong. Or am I best just dropping all fluid out and starting again.
Throughout process, gearbox was cold and car had levelled itself in the highest suspension height.
