[langley]

Whilst rebuilding my gearbox cooler lines, I lost some fluid during the process.

Once I completed the rebuild I loosened the gearbox fill plug to top up an was promptly coved in fluid.

Thinking maybe it was becauwe it hadnt been run for a while I started the car and cycked it through the gears and rolled it forwards and backwards. Gearbox still cold I popped the top up plug again and was ****ed on again.

Sooo, any ideas what im doing wrong. Or am I best just dropping all fluid out and starting again.

Throughout process, gearbox was cold and car had levelled itself in the highest suspension height.

 

[Datatek]

Fluid level is checked with the engine cold and idling after cycling through the gears and back to P.

 

[langley]

Thats what I did. An it still ****ed out.

Fluid was cold as was the engine.

 

[Datatek]

Thats what I did. An it still ****ed out.

Fluid was cold as was the engine.

But was the engine idling?

 

[langley]

Yip was the second time

 

[Datatek]

Yip was the second time

Then the box has been overfilled.

 

[langley]

Bgger bugger bugger..