oakey

oakey

Well-Known Member
Full Member
1996 4,6 V8
Silly question but the numbers on the eas housing, which bag do which pipes go to?
 
If you imagine the valve block face up, the pipes go to the same corner as the layout.
 
Thank you Wammers and Grrrrr
That write up is superb full marks to Paul
 
oakey said:
Thank you Wammers and Grrrrr
That write up is superb full marks to Paul
Click to expand...

I was going at one time to do a similar thing, but finding that saved me a lot of work. It is very good and should be looked at by anyone considering working on the valve block. If anyone loses the link it is listed in my EAS post in the Tech archive. Good luck.
 
About to re do my pump as I was able to hold air back with my thumb
 
Okay looking at Island web site
They sell a solenoid repair kit, a solenoid diaphragm repair kit and an O ring repair kit.
Is the normal overhaul of the valve block only the O rings or should I get solenoid repair kit too?
 
oakey said:
Okay looking at Island web site
They sell a solenoid repair kit, a solenoid diaphragm repair kit and an O ring repair kit.
Is the normal overhaul of the valve block only the O rings or should I get solenoid repair kit too?
Click to expand...

Just the O'rings and diaphragm.
 
You must log in or register to reply here.

Similar threads

JamesBB
P38A EAS again.
2 3
Replies
41
Views
3K
JamesBB
JamesBB
JamesBB
P38A 1996 WABCO ABS ECU connector
Replies
3
Views
290
JamesBB
JamesBB
D
Nanocom in Preston Lancashire
Replies
19
Views
2K
Mark Piercy
Mark Piercy
Montyjohn
P38A Adding a valve to manually fill EAS tank and why did my pump fail again?
Replies
14
Views
2K
Datatek
Datatek
ar1g3
P38A Which EAS repair kit to get?
Replies
18
Views
2K
Grrrrrr
Grrrrrr