[oakey]

1996 4,6 V8
Silly question but the numbers on the eas housing, which bag do which pipes go to?

 

[wammers]

1996 4,6 V8
Silly question but the numbers on the eas housing, which bag do which pipes go to?

http://paulp38a.com/range-rover-p38/eas-valve-block-renew/

 

[Grrrrrr]

If you imagine the valve block face up, the pipes go to the same corner as the layout.

 

[oakey]

Thank you Wammers and Grrrrr
That write up is superb full marks to Paul

 

[wammers]

Thank you Wammers and Grrrrr
That write up is superb full marks to Paul

I was going at one time to do a similar thing, but finding that saved me a lot of work. It is very good and should be looked at by anyone considering working on the valve block. If anyone loses the link it is listed in my EAS post in the Tech archive. Good luck.

 

[oakey]

Thanks Wammers

 

[biketeacherdave]

Iv been reading that guide severely times over before I refurb my new to me valve block

 

[oakey]

About to re do my pump as I was able to hold air back with my thumb

 

[oakey]

Okay looking at Island web site
They sell a solenoid repair kit, a solenoid diaphragm repair kit and an O ring repair kit.
Is the normal overhaul of the valve block only the O rings or should I get solenoid repair kit too?

 

[wammers]

Okay looking at Island web site
They sell a solenoid repair kit, a solenoid diaphragm repair kit and an O ring repair kit.
Is the normal overhaul of the valve block only the O rings or should I get solenoid repair kit too?

Just the O'rings and diaphragm.

 

[oakey]

Thank you