D

Davidmac

Member

• Dec 15, 2011

• #1

Help I'm getting a bit paranoid about the wiring harness problems on the Disco 2s and need a few questions answered.
1 where can I find the ECU with its famous red plug ?
2 Is it best to change the full harness or just do the O rings ?
3 Will I need to change the rocker cover gasket while I'm in there ?
Cheers Davy

 

jamesmartin

Well-Known Member

• Dec 15, 2011

• #2

behind battery under lid ,change injector loom ,new rocker gasket would be best though not essential ,clean other loom both ends with spray cleaner keep doing till dry make take a few days

 

D

Davidmac

Member

• Dec 15, 2011

• #3

Hi there thanks a lot I will check it out in the morning

 

M

mikes lr

New Member

• Dec 15, 2011

• #4

if you have oil in the red plug you will also find it in other places like maf plug/fuse box and so on

 

D

Davidmac

Member

• Dec 19, 2011

• #5

mikes lr said:

if you have oil in the red plug you will also find it in other places like maf plug/fuse box and so on

Click to expand...

Thanks a lot once this weather starts to behave I will get out and have a look. Is the ECU in an alloy casing ,on its side between the jack and fuse box.I have had a quick look and figure this is it.Also is the loom from the ECU to the rocker casing something that needs replaced or is it a clean up job.it is a bit oily looking in there.
Cheers Davy

 

sierrafery

Well-Known Member

• Dec 19, 2011

• #6

check this out www.discovery2.co.uk / Workshop /Injector Harness

 

D

Davidmac

Member

• Dec 20, 2011

• #7

sierrafery said:

check this out www.discovery2.co.uk / Workshop /Injector Harness

Click to expand...

Perfect mate thats what I was looking at and the guide is excellent cheers