lerk
New Member
Nice cheap replacement, go to your local breakers and assuming they've got one in decent nick pull it out, you only need to drop the window an inch or two and either side will fit! cost = £0 as long as you wear your best scrappy coat (you know, the one with REALLY BIG POCKETS!
)can you show some more pics of how you ran the wiring for the light bar ? was thinking of doing the same on mineGot the light bar on today
theres my plan for the day thenNice cheap replacement, go to your local breakers and assuming they've got one in decent nick pull it out, you only need to drop the window an inch or two and either side will fit! cost = £0 as long as you wear your best scrappy coat (you know, the one with REALLY BIG POCKETS!
i just drillev an 8mm hole behind every light and 1 at the end and pulled all the wires through, as far as connecting them up i'm still looking at ideas as i want to have them wired into relays in the fuse box
Well extreamly ****ed off now.
i rang mother who lives where my land rover is parked and she informed me thet our next door neighbour says my tyres were flat on my disco, so i've been out and had a look and all 5 tyres have been stabbed, they were practiaclly brand new tyres thats around £500 ish worth of damage because they are just over £100 a tyre i think. thankfully i have spares but i'll have to get them on tomorrow night
To **** me off even more they kicked my garage door in thankfully didnt take my bike or my tools but still ****es me off. i've rung the police and they are going to send a forenzics unit out to investigate and take finger prints. ARGH i bloody hate this village
i rang mother who lives where my land rover is parked and she informed me thet our next door neighbour says my tyres were flat on my disco, so i've been out and had a look and all 5 tyres have been stabbed, they were practiaclly brand new tyres thats around £500 ish worth of damage because they are just over £100 a tyre i think. thankfully i have spares but i'll have to get them on tomorrow night
To **** me off even more they kicked my garage door in thankfully didnt take my bike or my tools but still ****es me off. i've rung the police and they are going to send a forenzics unit out to investigate and take finger prints. ARGH i bloody hate this village
discoboy84
New Member
good luck on the police
wouldnt hold ya breather
wouldnt hold ya breather
Right then not updated for a while, been looking for a seal rebuild kit for the Bosch ve pump but i'm not having any luck
G W Dale Diesel Engineers
thanks for that, i'm awaiting a reply from them.
i havent got front fogs on this disco does anyone know if the wireing will be there for them? as i want to run the top lights through the frong fog switch and it's gonna be easier to tap into the origional wires then it will be to do it from scratch
i havent got front fogs on this disco does anyone know if the wireing will be there for them? as i want to run the top lights through the frong fog switch and it's gonna be easier to tap into the origional wires then it will be to do it from scratch
i've had a quick look and all i can see is 2 bolts on either corner of the bumper can't see much in the midle as there is a towbar and a what looks like a skid plate in the way
had another look for the bit of the loom that goes to the front fog switch and i still can't find it looks like i'm going to have to wire it in from scratch
had another look for the bit of the loom that goes to the front fog switch and i still can't find it
looks like i'm going to have to wire it in from scratch
