[300bhp/ton]

Does anyone sell one for the p38? Or maybe one from another vehicle (D2/Defender) that would bolt up easily?

 

[Hicap phill]

Glynn Lewis?
He does them for defenders/disco but as I’m not up to date on p38ends I’m unsure if the difference

 

[Grrrrrr]

Does anyone sell one for the p38? Or maybe one from another vehicle (D2/Defender) that would bolt up easily?

You've gone up higher than the EAS would?

 

[300bhp/ton]

You've gone up higher than the EAS would?

Higher than the off road mode I think or maybe somewhat equal to it. Not really an issue, but you can visually see the axle is moved over to one side.

Found some adjustable ones in the USA but silly money and seem to use a heim joint instead of bushes. So isn't what I'd want any way.

I think modding the factory items should be pretty easy, just need to find the bits I'd need. I found this as an old post on another forum:

If I could find a supply of the rods and caps it would be fairly easy to achieve.

 

[Joebur123]

Higher than the off road mode I think or maybe somewhat equal to it. Not really an issue, but you can visually see the axle is moved over to one side.

Found some adjustable ones in the USA but silly money and seem to use a heim joint instead of bushes. So isn't what I'd want any way.

I think modding the factory items should be pretty easy, just need to find the bits I'd need. I found this as an old post on another forum:

If I could find a supply of the rods and caps it would be fairly easy to achieve.

Hi sorry to ressurect an old thread but how did you get around this problem did you find a set of adjustables or did you modify the originals? Any help would be much appreciated

 

[Mark Piercy]

Hi sorry to ressurect an old thread but how did you get around this problem did you find a set of adjustables or did you modify the originals? Any help would be much appreciated

OH you are deep in sticky stuff on your avatar

 

[Mark Piercy]

Hi sorry to ressurect an old thread but how did you get around this problem did you find a set of adjustables or did you modify the originals? Any help would be much appreciated

Maybe cut add and weld

 

[Joebur123]

Maybe cut add and weld

Yes, I was thinking along the lines of welding a nut on and fitting a threaded hiem joint to one end

 

[Joebur123]

OH you are deep in sticky stuff on your avatar

And yes that poor car ends up in all sorts of places it's not ment to lol

 

[Mark Piercy]

Yes, I was thinking along the lines of welding a nut on and fitting a threaded hiem joint to one end

That's not a bad idea tbh

 

[Joebur123]

That's not a bad idea tbh

Need to get underneath over the weekend and take some measurements but from what I've seen should only cost about £50 to do front and rears so will post back with how it goes

 

[Mark Piercy]

Need to get underneath over the weekend and take some measurements but from what I've seen should only cost about £50 to do front and rears so will post back with how it goes

With pictures please

 

[Joebur123]

With pictures please

Will do