MJI

Well-Known Member
I may need to do the seals on Sunday, but I want to be prepared.

What tool do I use to remove them without damage?

Thanks

Martin
 
I made a small pry bar from the frame of a mini paint roller, others use a slide hammer, be careful not to damage the solinoid on top pf the injector
 
I made a small pry bar from the frame of a mini paint roller, others use a slide hammer, be careful not to damage the solinoid on top pf the injector

What size slide hammer would be needed as I may order so I have one?
 
I used a 5mm diameter Long handled allen key. I think I used a tent peg once as well.
Lever just under where the injector bodyconnects to the solenoid.
Just be gentle, they shouldnt need forcing out. Ive got to open up my cam cover this evening, if I remember Ill dummy up the removal tool and post a pic.
Mark
 
I used a 5mm diameter Long handled allen key. I think I used a tent peg once as well.
Lever just under where the injector bodyconnects to the solenoid.
Just be gentle, they shouldnt need forcing out. Ive got to open up my cam cover this evening, if I remember Ill dummy up the removal tool and post a pic.
Mark

Thanks

Hopefully this will NOT be another engine rebuild thread
 
i removed them with this kind of tool ;), if you position it well you can lever out the injector nicely
injrctor removal tool.jpg
 

Similar threads