[Castor]

Chaps,

Where in Rave or elsewhere is the idiot-level lubrication schedule?
I'm assuming the Hardy-Spicer's on the propshafts are nippled?
What else? Is there anything else that needs attention?

Somewhere I have a grease-gun.....

 

[Grrrrrr]

I think there are 3 nipples on each prop, IIRC.

Oil & filter.
Gearbox.
Transfer box.
Diffs.
Clean out intercooler.
Fuel filter.
Pollen filters.
Air filter.

Think there's a service schedule etc in RAVE.

 

[Castor]

Think there's a service schedule etc in RAVE.

Thanks.

I thought there should be a schedule, but I can't find one......

 

[Datatek]

I think there are 3 nipples on each prop, IIRC.

Oil & filter.
Gearbox.
Transfer box.
Diffs.
Clean out intercooler.
Fuel filter.
Pollen filters.
Air filter.

Think there's a service schedule etc in RAVE.

Total of 6 on the petrol, 5 on the diesel

 

[Littelwill]

Totally disappointed about this thread lol

 

[Busterthebulldog]

I looked through my written guide and can only find 3 grease nipples listed. It also says use a handgun not air but I only have air. Will this be an issue.

 

[brianp38dse]

Not what i was expecting ether

 

[Datatek]

I looked through my written guide and can only find 3 grease nipples listed. It also says use a handgun not air but I only have air. Will this be an issue.

One nipple on each UJ plus one on the sliding section of each prop. A total of 3 UJ's on the diesel, 4 on the petrol.
You may find a standard grease gun head will not fit between the UJ webs. Air may push too much grease in and blow the seals.

 

[wammers]

One nipple on each UJ plus one on the sliding section of each prop. A total of 3 UJ's on the diesel, 4 on the petrol.
You may find a standard grease gun head will not fit between the UJ webs. Air may push too much grease in and blow the seals.

Standard practice to grease until old grease is expelled past seals and excess wiped off.

 

[Datatek]

Standard practice to grease until old grease is expelled past seals and excess wiped off.

True, but air grease guns can be a bit violent, or maybe I don't know how to use one.

 

[Castor]

https://myspace.com/jovan36/video/chimp-tells-joke-penguin-blows-seal/30345070

 

[brianp38dse]

4 uj on the diesel if its a manual

 

[Castor]

Genuinely useful gentlemen.
Thanks all!

 

[Castor]

Standard practice to grease until old grease is expelled past seals and excess wiped off.

 

[wammers]

Why for you say that glasshopper?

 

[Castor]

Why for you say that glasshopper?

for gross innuendo without due cause.

Also wifey not happy with "old grease is expelled past seals and excess wiped off".

 

[wammers]

for gross innuendo without due cause.

Also wifey not happy with "old grease is expelled past seals and excess wiped off".

You are such a bad person. As if iwould insinuate such a thing. Better than it running down her legs though.

 

[ovalandrover]

You may have to grind a couple of flats on you grease gun head to get it to grip the nipple

 

[Castor]

Do I have to grind it to get it between the legs and grip the nipple?
If I had a thinner one would that help? Or an old style one where you just push the plunger?

 

[Grrrrrr]

One nipple on each UJ plus one on the sliding section of each prop. A total of 3 UJ's on the diesel, 4 on the petrol.
You may find a standard grease gun head will not fit between the UJ webs. Air may push too much grease in and blow the seals.

I've got one of those mesh extension things on my grease-gun and I'm very glad of it. Makes the job very easy. Can well imagine it being impossible to get in to some of the nipples without it.