[sovereign]

Quick question, what size Allen socket is required for the diff drain/refill plugs?
My set is missing one, the 12 mm is just a little too big.
So I'm guessing an 11mm one.

Getting a bit of a rumble up front, wheel bearings seem ok.

Was doing the brakes pads all around today.
Got new tyres fitted a few days ago, lock nut adapter was split.
Wheel nuts far too tight, hate letting anyone near my car.
Had to hammer a socket onto the locknuts, and then roast it off.

Anyway noticed some oil on the diff.

 

[bushwwacker]

1/2" square drive aren't they ?

 

[Druim]

1/2" square drive aren't they ?

Yep - no socket needed, just the handle/rachet

 

[sovereign]

Thanks guys, can't believe I didn't cop that.

 

[wammers]

Obviously when you were little, mom and dad never got you one of those little tables with different shaped holes in it, that you put the correct shaped wooden blocks into.

 

[bushwwacker]

​

Yep - no socket needed, just the handle/rachet

I thought I was gonna make a twunt of my sen!

 

[sovereign]

Obviously when you were little, mom and dad never got you one of those little tables with different shaped holes in it, that you put the correct shaped wooden blocks into.

They wouldn't get me one after the 300 piece jigsaw puzzle incident.