[adam300tdi]

ive got a 300tdi disco and looking at gettin some wa props can you get them for the rear with a rubber donut???

 

[wiltshire landyman]

ive got a 300tdi disco and looking at gettin some wa props can you get them for the rear with a rubber donut???

thro the donut away there a waste of time..use a 200 rear prop and diff flange

 

[prior1188]

I have a 3" lift on my disco 1 running on a TD5 wide angle prop shaft with QT3 correction arms.
It's fine and only vibrates at low speeds.

I had 2" lift and 35s on my old 110 with standard props and no correction arms and it was the fine. Did have to replace the uj's quite often though lol!

 

[The Ferkin BoB]

This is why I ask the qs

these are well solid,had em oh the work 110 and they are tough,

im not sure on the amount of lift you have tho

QT Land Rover Defender / Discovery Front Carden Joint Prop Shaft - P1021 - Prop Shafts - Engine & Transmission - Land Rover Discovery Series I - Qt Services

 

[wiltshire landyman]

double de cardon joints are a constant velocity joint.
they are not for more extreme angles they are for when flange angles are to far out of parallel with each other to be overcome with changing the phasing on a standard hooks type(ordinary) joint, typically the front prop as the drivetrain angles are way different.

I have a 3" lift on my disco 1 running on a TD5 wide angle prop shaft with QT3 correction arms.
It's fine and only vibrates at low speeds.

I had 2" lift and 35s on my old 110 with standard props and no correction arms and it was the fine. Did have to replace the uj's quite often though lol!

double de cardon joints are a constant velocity joint.
they are not for more extreme angles they are for when flange angles are to far out of parallel with each other to be overcome with changing the phasing on a standard hooks type(ordinary) joint, typically the front prop as the drivetrain angles are way different.