[virtualme123]

So I changed the clutch on my manual 2.5 DSE and obviously had the gearbox out (without breaking) gearbox from transfer box). Trouble is now I now can't select low range however before I had no problem. Any ideas what could have gone wrong?

Thanks

 

[jamesmartin]

plugged motor and loom back in ,damaged motor

 

[stopover]

So I changed the clutch on my manual 2.5 DSE and obviously had the gearbox out (without breaking) gearbox from transfer box). Trouble is now I now can't select low range however before I had no problem. Any ideas what could have gone wrong?

Thanks

Did you forget to plug the transfer motor hi/low in?

 

[virtualme123]

Well I think it is just the big two black connectors that fit together and then attach to a metal clip. I double checked this connector and all looked good.

I heard about putting a 12v charge over it to see if it might be a duff motor...

 

[Chrisfrain2007]

Does it ask you to select neutral on the message centre?

 

[virtualme123]

No neutral message, had that before and realised I had that transfer box fuse in for towing

 

[Chrisfrain2007]

Mine won't go into low unless I have it in reverse, either the switch is fubar or its been linked to the reverse switch, does the Orange light on the dash flash when you push the button?

 

[virtualme123]

Yeah I get flashing from the button and on the dash gears with a cross through it flash then got out, can't remember what it used to do when it worked to be honest...

 

[Chrisfrain2007]

The Orange light flashes as it moves from high to low, doesn't beep or anything but then briefly shows low on the message centre