Search results

Ive a bit of an unusual issue, well I think so. We’ve just done a chassis swap on my 1987, 90, Discovery 200tdi engine. Ive been doing the wiring, when the rear fog light was switched on, along with headlights all electric was lost! Nothing worked on the 90. This eventually corrected itself and...

Whilst doing the chassis swap on my 90 decided to tart up the bulkhead as its in pretty good condition. Refurbing the heater, ordered a new matrix and trying to find replacement cables for the controls. One has broken but I'm thinking change all 3 while it's easier to access them. Does anyone...

I'm having the chassis replaced on my '87 90 to a galv one. Ive ordered some Mordent T wash to etch the chassis but not sure what to paint it with. I want to loose the shiny look and add another layer of protection while I can get to everything. I was thinking of hammerite under body seal but...

1987 LR90. Couple of weeks ago the lights wouldn't work, messed with connector from light switch and came on. Next Time I went to start, again no lights, but not the connector. Checked continuity through switch and there was none for side or dip. Bought a new switch, tested continuity and all...

We've just bought a Border Terrier pup and i'm working out how to fit him in the 90. It has no seats in the back and i don't want to install him in a cage, it takes up space and he won't get the 'thrill of the ride' I'm thinking of removing the cubby box between the front seats and making a box...

My mate has a 2004 Freelander TD4 HSE. While driving it today it seems to have blown the turbo, smoked like a good un and no power. Any suggestions of a place around Gloucestershire where he can source a replacement?

Decided my dash needs updating and thought i'd splash out on a raptor one. Land Rover 90 with what i'm told is a TD5 bulkhead and a TD5 dash. It would seem raptor ones won't fit my dash (the large ones you can fit a CB/Radio etc in)but they do the same type of one that came out of it. So, does...

1997 LR90, 200TDI Disco engine Last spring alt was squeeling like a stuck pig. Took it to me mates garage and alternator was shot. Replaced with a new one (100Amp). Fast forward to January. Started squealing again, took it back and the alt was burnt out......Warranty replaced.....still squeals...

I have a 1987 LR90, last December it had an advisory with 'Front Trailing arm has slight play in a pin/bush (2.4.G.2)' I've had a look on here and par for course (for me at least) i've failed to find a thread about replacing these! Does anyone know if one exists? Is this a job I can have a go at...

Just bought some Boost Alloys. Only problem is the rear wheel carrier bolts aren't long enough for the new wheel and the threads are also wrong for my locking wheel nut. Is the thread a standard size and if so what is it please?

I know this has been done to death, i've searched but not found what i'm looking for (I know someone will find something straight away) My front seats in the 90 have seen better days. Looking to change them. I would like something comfortable, with head restraints high enough for the missus to...

,,,to find some locking wheel nuts for Boost Alloys on my Defender? A couple of Ebay sites quote they don't fit Boosts, when I questioned one they said they think its something to do with the rim being narrower? I then found a set of 4 on devon 4x4, emailed them twice to confirm they are OK with...

I have a 1987 90 with what I think are RR classics and 30mm spacers. Does anyone know if June 2014 90 Sationwagon boost alloys 16" would fit? Drums back and discs front if that makes a difference?

NOW SOLD I’ve decided to put my bike up for sale, i’ve not ridden it since July 2014 and now I work from home full time I don’t even ride it for work anymore. I’ve listed all the things I can think of below, selling it with everything attached if possible, i may end up stripping the bling and...

It looks the mechanism that returns the push button on the door handle is rusted beyond repair. Initially i couldn't open the door, I have now managed to be able to open it but it won't close unless i push the piece inside manually (The piece to the right of the orange plastic in the attached...

Just fitted winch and bumper to my 90 It originally had spot lights fitted to the A frame. Unfortunately the spots won't fit on the attached brackets due to the winch. I was thinking of getting a bracket welded to the top of the A frame to get a bit more height but this would possibly push the...

Just fitted a new winch and bumper from Goodwinch. Now trying to work you the best place to mount the number plate? Stuck it in the window for now but i'm sure this isn't legal. So, where did you mount yours?

After watching the vid clip of the series 1 LR brought back to life i've decided to help my mate 'try' and locate his old series 2a. The idiot sold it years ago to fund an engagement ring:eek: Reg is WFO602, anyone any idea how to go about locating it, if it is still on the road? He did a fair...

My Mrs has a frozen shoulder (left one) it is causing her issues getting in and sometimes out of my 90. She is unable to use the grab handle with her left hand and tries using her right to scrabble in the truck. I've put some grip tape on the rock/tree slider to give her grip for her feet but...

Hopefully a quick question, or at least a quick answer... Reverse light not working well, have to mess with the gearstick...I've rewired it so now looking to replace the switch. Question is, how can I tell which one to get? Its a 1987 LR90 that has had a 200tdi conversion from a petrol...