Search results

My disco 2 TD5 is leaking fuel into the engine oil. The injector seals have been done so it looks like a crack in the fuel gallery in the head. I don't know of a quick fix so it will be up for sale. The point of the post is, I am thinking of an early Disco 3 to replace it. Does anyone have any...

My Disco has just started acting up today. From cold it turned over quickly but wouldnt start.After some cranking it fired up. Did a 20 mile trip, left it half an hour and had the same problem. It starts up immediately after stopping with no bother. It seems like fuel starvation. The only...

I have a 52 plate td5. The rear can settle right down in an hour of maybe over night. On start up it rises to normal height in about 15 seconds. Once at ride height the driver's side is 15mm lower (just as it is when settled). I have done a soapy water test and the driver's side air bag is...

I have a 52 plate TD5. ...........Yes I have read MANY other threads and some brilliant guides on leaking sun roofs. I have two sun roofs and have stripped the full head lining out. I have hosed the roof for over an hour and cannot see any evidence of leaking, yet after a downpour I get water...

When I release the key on my Disco td5, the engine starts normally, then straight after (for only 1 or 2 seconds) there is a noise from somewhere behind the dash or bulkhead area. It sounds like a relay chattering. It appears to be associated the the starter motor. I'm not familiar with the...

I am talking about the alloy caps over the wheel nuts NOT the locking wheel nuts. The black plastic tool which came with the tool kit has teeth missing. I presume these things regularly break. Is there a trusted way of removing the caps or do I have to buy a tool?

I filled my Disco td5 (2002) to the brim last night. Took it out today and noticed fuel was evident on the floor under the vehicle, apparently coming from somewhere on top of the tank and emerging on both sides. When I bought it a week ago, I was underneath it and no sign of fuel whatsoever on a...

I have a 2002 disco td5 with a low biting clutch pedal, so after a life time of bleeding it with no improvement I have decided to change both the master and slave cylinders. The master is a doddle to get off but the slave is a pain. It's really hard to get to the mounting bolts. When you do find...

Hi folks. the name is John and the LR is an 02 TD5 facelift. It is road worthy but I just haven't swapped the insurance and done a service etc. Looking forward to getting stuck in. I have been in the forum shadows for a while:)