Search results

I seem to have an intermittent starting problem on my 1996 'N' registration 300tdi. Its manual transmission 2.5 tdi. When going to start the car, it operates as normal. Glow plug light comes on and timers as normal. Then sometimes it starts no problem, but other times there is nothing...

For sale is a Faultmate FCR to suit a Discovery 3 I've only used it twice since purchasing it July this, but it is a great bit of kit! Only reason for sale is that I'm looking to move onto a one of there more advanced bit of readers, that enables me to also re-flash the software The...

It would be preferable to get them today to fit tonight Do they need to be any particular size? I'll pop into Halfords on my way home from work

I had to pull my front wing off this weekend to do some welding for the MOT I've now got a problem as how to re-fix the arch liner (the plastic arch that fits between the outer and inner wings) As soon as I removed the wing, the arch liner fell free from the wing; how is it meant to be...

I've had a few problems recently where my key wont turn in the ignition barrel to start the engine. The key fits in the barrel perfectly, but sometimes just wont turn Last night it took over 30mins of wiggling to get it to turn. Tried WD40 in the barrel, but to no help I assume the only...

Yeah, seen plenty of used ones on ebay, but would prefer to buy a new one if possible Thanks for the link, but they are more or less the same price as I was already finding £118.80 + p&p Famous Four - Part Information for FF002288

I need a new motor, but cheapest I found was somehting like £120 Where can I get one for a few quid? Got a link? Thanks Ade

I would say its a failed EGR or maybe even both Because your pre 2007, best way would be to buy a balnking kit and take the EGR's out of the equation completly I have the Bell Auto's kit fitted to mine. Quality bit of kit, great instructions, easy to do DIY, and fixed my sluggish problems...

I bought my 300tdi in a run down state and have proceeded to restore it and get an MOT The arches and doors although intact dont look the best, so I purchased a set of plastic arches as per the link below...

So are the recon boxes from MM4x4 OK? Seem to cheap to be true? My steering box has started to drip and failed an MOT, so need to get it replaced

Mark, You have a PM :) Thanks Ade

I am trying to remove the injector pump and when i am setting it to TDC on the flywheel the pin position on the injector pump is near the 6 oclock position where all manuals and photos show it in the 11oclock position. Is this a problem or can the position be different? Thanks

Thanks Lerk, I just needed a breaker bar, the haynes manual said to use a ring spanner, but it wasn't moving with a spanner! Thanks again Ade

Today was the day that I decided to have a go at replacing the gasket Everything went fairly well, until I got to the end, when I can re-fit the belt It was dark by this time, so will have a better look in the morning, but wanted to post up this thread incase I'm doing something obvious...

I've not had the Disco long. and still learning about the 300tdi Wheres the injector pump located? I may not have described it right, but I've just googled a photo and put a red arrow where the diesel drips from (as attached), so hopefully helps Its not a constant steam by any means but...

I'm needing 1 'freestyle' alloy wheel, with or without tyre really, as long as its in decent enough condition Anyone got one lying around? Even better near Edinburgh :) Thanks Ade

Whilst trying to track down a coolant leak, I noticed a steady stream of droplets coming of the throttle linkage. After smelling it, it was definetly diesel I've chacked all the union connections and pipes but cant find anything a miss After searching the forum again, I think it might...

Over the Christmas holidays the heaters in my wife’s Disco stopped blowing out heat, so checked it over and it appeared to be low on coolant Filled it back up, and upon looking over it, it looks to have developed a leak behind the alternator that runs down the block I don’t...

I find the steering wheel on my 300tdi Disco1 to be HUGE after driving my Disco3 Are there any after market steering wheels available from anywhere? Thanks Ade

I'm pretty sure mine doesn't have a light/symbol that illuminates on the dash Does anyone have a photo of there dash where the light is? Any reason why they wouldn't light up on mine? Could that also point to faulty glow plugs? Thanks Ade