Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. C

    Is the immobiliser still in control

    You was right sierrafery, the fuel cut of needed resetting, it now starts, but not smoothly, I just need to get everything set up. cheers again
  2. C

    Is the immobiliser still in control

    Cheers Sierrafery, I'll give it a go as soon as the rain stops, (which could be in quite a while here in Wales
  3. C

    Is the immobiliser still in control

    I've just done the heads on my V8 and I think I've connected everything as should be, when I put the battery back on the car the hazards flashed and the car wouldn't turn over. I used the EKA code and now the car will turn over but still wont start and the hazards still flash. Is the...
  4. C

    Petrol line Disco 2

    Has anyone got a full or part of a fuel pipe from the petrol tank, I need the fitting that goes into the fuel pump unit, preferably with a small amount of pipe attached so I can connect it to the existing fuel line. Also are they the same as on the diesel motors
  5. C

    It all depends how bad and where it's rusted, if it's a little bit on the rails then plate it if...

    It all depends how bad and where it's rusted, if it's a little bit on the rails then plate it if its the rear cross member that shot replace it.
  6. C

    LPG Tank removal

    Cheers Landowner I've already done all the brakes so I have a flaring kit already, all I need is some pipe and new P clips and I'm away.
  7. C

    LPG Tank removal

    It's now Sunday morning and I have no LPG tanks and no petrol tank in the car, it also has no road tax or MOT. I need to do some work on the chassis, that's the reason for removing the fuel system. I live in a small town in mid Wales and professionals of any kind are hard to find. Once the...
  8. C

    LPG Tank removal

    I have a D2 with twin LPG tanks in place of the petrol tank, at the moment the tanks are hard plumbed all the way up to the engine bay. My question is, does it have to be hard plumbed or could it be done in the rubber pipe used in the engine bay. The reason I ask is, I have to remove the...
  9. C

    Why did you buy a disco!!

    I now have an office job (not allowed in the workshop anymore ) so keep my engineers eye and skill going I bought a Landy
  10. C

    crew cab for sale

    For some reason it failed to upload the pictures but if anyone wants some drop me a line. anyway it's taxed and tested until December. It's not a Rolls Royce but it should keep going for a good few years yet. It has no headlining and I ran over the steering column cover so that'.s missing as...
  11. C

    crew cab for sale

    I have a 1989 crew cab for sale. I've done loads of work on it but I now need a disco, (getting old) from the rear, new lights, new strengthened rear cross member, shocks, poly bush kit, fuel tank sender, alloy cover on gas springs covers the back with an stainless steel rack attached, a...
  12. C

    chassis welding

    You can learn a lot on these sites
  13. C

    Front Hub

    Thanks for the info Rich, I've not used Bearmach for parts before but there catalogue seems to be very good. It also helps knowing the chassis number the engine came from. One day I my find out where all the parts come from. Cheers
  14. C

    Front Hub

    I have a land rover defender with a discovery front axel, the hub is knackered and needs replacing. Because we don't know the age of the axel (only that it came from a 200) I have been told (by the garage repairing it)there are 4 hubs it could be and until we find the age of the doner vehicle...
  15. C

    Help

    Thanks for the prompt reply, it's saved me a 2 hour round trip to the nearest dealer
  16. C

    Help

    I have a Defender with the front wheel bearing gone, Ive followed the threads to replace it which seemed easy until I took off the wheel and found out I have a discovery front axle (200). The Defender parts are now in the post, what I want to know is will the parts be any good or will I have to...
  17. C

    Parts

    Finding the part numbers isn't the problem, it's knowing if the parts are the correct one's. If you go to paddocks your asked for the chassis number so you can match the parts to that number, but if the landy has been built from all sorts of landy's knowing the chassis number doesn't help. I...
  18. C

    Parts

    How the F---- are you supposed to know what the parts are on a 21 year old land rover. I bought a 21 year old 110 double cab which seems to be on a military chassis (due to the front cross member being bolted in not welded). The previous owner told me it had a 200tdi engine but it’s actually a...
  19. C

    New to the land rover

    Hello, I'm a land rover virgin but it seemed a good idear to get one due to the bad weater we had last year, it will also be a bit of fun at the weekends in the Welsh mountains. Some of you may of seen the one I bought it was advertised on the site last week ( 110 crew cab ). I hope I get as...
Back
Top