Search results

I'm in devon, but for a good one I could travel a bit

Anyone got a good rear tub for a 109, mine was owned by a chap with shares in pop rivet holes?

Funny thing, the rover 600 did not have a sump baffle, however it did have the fixings for one cast inside, the rover 420 however did have the baffle and identical fixings, so so long as the clearances are to specification on the rods I have aquired a 420 baffle which I will fit into the 600...

Many thanks if you did make the tooling for a job well done, when compared to the tin one its just so much better, over on the rover forum was a chap who said he designed the alloy one when he was at rover for powertrain when they first has solid modelling software

Here is the bit you clearance shown in red

Just done this on mine, The prima double skinned sump is as thick as a dodgey tin can...honestly! so after a good few years on and they are looking a bit worse for wear. Also they are no longer available. My engine is out for a spruce up and I started looking for a good second hand one...non...

Hi, Managed to get the instrument panel, do you have the wiper cover panel? Sorry took so long to read this. email is [email protected]

Trying to get a wiper blank panel, tried in various wanted sections on various sites and ebay. Anyone got one ?

Do I need just the first one??:

The second clamp looks like this, which looks like a series 3 clamp, can someone enlighten me

Just painting and putting my column back in, I have an extra clamp? I have the plate that bolts to the bulkhead on the dash side with 3 holes in triangle pattern, I also have the column clamp that this bolts to, However I also have anothe clamp with 2 holes in 2 pieces that clamps round the...

Well that has sorted future proofing :) the prima mounts will be the exact distance from the gearbox to accept a 2 1/4 petrol engine , this will then mean I can now also fit a 200tdi :) Also due to the gearbox being back where the straight six one sits the 200tdi will/would have more space at...

Perkins cam Belt Timing Belt Perkins Prima £32 Perkins Prima M50, M60 & M80T timing belt kit £66.75 http://www.parts4engines.com/perkins-prima-m50-m60-m80t-timing-belt-kit/

Doom and gloom :) Don't worry, water pumps can be rebuilt, got a nice company lined up if I need one, around £40. Its was used in LDVs so parts while not pence are still widely available if you know where to look Vehicle has been fine running for 7 years

Nope I did all the work originally, it is a 109 straight six chassis, the gearbox is the fixed position, the engine mounts are very far back due to the shortness (same as 2 1/4) of the engine

Anyone know what sort of lead times to expect from richards chassis?

Flat ones are not that good:( then again the motor has gone on mine too:(

Thanks pete, Funny how some go for more than you can get a NOS one from Blanchards at £36

Well, when I did mine I asked this, galv will not take if there is paint they said, asked at the sand blasters and they did a good job at going up into the box section from the wing top area where there is an opening. Unless you have waxoyled the bulkhead and it is just factory paint inside the...

Looks like Im future proofing our 69 109 2a,Already spent too many summers welding the chassis for another load of holes to come through, plus down in the wet country it is always wet. So the Landy has a perking prima fitted by myself 7 years back. I want a richards chassis and am wondering...