Search results

Has anyone fitted a VERITAS clutch? I've found a 3-piece kit for £57 on t' eBay. Is it worth the money or are they the same quality as blue-box stuff?

300tdi trial fit with bulkhead went OK. Just a couple of adjustments to make. I might make the engine sit a bit higher, now I understand how much room is in the engine bay.

I note air filter wasn't mentioned (although I assume it was part of the service).

It's got a defender LT77 unit on at the mo. Using it as a welding template. If I get brave enough, then I might build an R380 / LT77 hybrid. Just not a priority right now.

....actually, I doubt any standard mount would fit because my engine is about 4" forward due to non-standard gearbox. Best thing for me is to: 1) grow a pair and take the grinder to the battery tray and old mounts. 2) sit the whole lot together and make it fit!

TBA, I'm quite happy that the front x-member is being left in it's "virgin state". I was going to fab my own mounts - I'll see about price on ebay. What's the crack with "cold galv paint"? What advantage does it hold over a zinc primer and top coat (underseal for example)? I like an...

I've already got my a 300, Nick. It's almost done now anyway. Does a 200 sit on the old mounts? I knew it would happen, Doc. It just breaks my heart to take the grinder to something so beautiful. It is only a battery tray, and a bit of engine mount so I think I will get over it. It was just...

Well.... I finally received my chassis from Richards, and now I've got my 300tdi lump sat on top of it. I knew this would happen, but I've got to cut bits off my new chassis to make the engine fit. This is going to break my heart!

I've gone and got myself 2 defender axles, and I think I'm going to cut the coiler bits off them and fit them to my series - load of threads on that, so I'm happy. What I can't find is what length of steering bar I need to connect the series steering relay to the defender steering knuckle - I...

I assume the bulkhead and it's outriggers are in the right place (otherwise the sideways bolts through the chassis wouldn't line up)?? 11" between front pulley and front x-member sounds too much. Is the front x-member original? I've seen them modified for power steering boxes, which involves...

Maybe easiest to run a new wire?!?

Consider the weight of the crane itself. I wanted one that I can lift myself to move from job-to-job. The 2 ton units were a bit too heavy for a 1 man lift. I got this one http://www.amazon.co.uk/gp/product/B00GMDLSLO/ref=oh_details_o03_s00_i00?ie=UTF8&psc=1 The biggest thing I've lifted with...

Try unbolting the gear lever and see whats under there. Wouldn't surprise me if you find potatoes growing in there! Clean and crap out of the 3 selector rods and soak them with a penetrating oil. Work the gear stick round on the bench. That worked my my S3.

That's some good work there! I need to do something similar.

I was in the same situation. I wanted confidence that the dumb irons weren't going to fall off on the rough stuff. When I thought about the time and effort required to patch and weld, the cost of new x-members and 1/4 chassis etc. I just ordered the chassis from Richards. I want to keep the...

The defender LT77 is supposed to be an easy fit, and the Disco transfer box has the higher ratios, together with the brakes and diffs from the Disco axles it sounds like the perfect combination. I assume you're doing this to an old series and it'll be tax exempt. In my opinion it doesn't get any...

I have a disco R380 that I intend to put into my series. (project on hold while I wait for a new chassis to build on). The disco box is about 10" longer than the series box, and the gear stick is quite far back. The transfer box is about the same flange-to-flange dimension as the series. I would...

Jack each wheel up in turn, and see if it's one wheel causing the problem. As you try to turn the wheel you've lifted, see if the prop is trying to turn. You should be able to work out if it's a wheel brake / handbrake / axle / transmission issue.

Any chance of some pics?? I've been offered some disco axles for my 88", but I've no idea how wide they are. If I see some big tyres on them then it might inspire me to get something done!

Whooohooo! There's an incentive to finish by 88" S3!