Recent content by taffyboynz

Have not been able to down load from that link but this one is 1850 pages with full explanations how to do each job covers all models and gearboxes:)

Mite help i just purchased on line a full manual covering 97-2006 incl the V6 and the jaco boxes covers everything only $9.00US sent as a PDF you can print from ext, Supplied same day from [email protected] it has made working on mine so easy if you cant i could loan you mine but you would...

Thanks Hippo does not look to difficult will just take time (getting on a bit) will have to put part of my garage aside for a couple of weeks and press gang some mates to do the lifting! i am still worried about my existing box which keeps going well and then out the blue starts to slip in 4-5...

Thanks Nodge i do have access to a workshop just cant find a manual on the V6 freelander 1 that explains the procedure, i have spoken with a Rover mechanic who says you can just change the box but cant get hold of him now if i find out more i will post it here

Hi all placed this request in the wrong area so am trying again! i have a replacement box and cant find fitting info? have a manual that shows the set up but not the basics,:confused: does it come out the bottom and what needs to be removed to clear its path so if anyone has done this lately...

Thanks Guys i will have a good look to see if i can do it as OWL describes there seems to be space to do it this way will remove wheel arch for easy view and will report back:decision:

Yes no joy! have a manual that shows a good breakdown but not the procedures step by step even a shortened explanation from someone who's done it will help please thanks

Hi all, now have my replacement box and have to fit it!! a quick guide would be great if someone has the time please:confused: don't seem to be able to find a post on this looks fairly straight forward to unbolt and unplug but what to to be removed to make easy extraction:o any guide will help

Thanks Tacr2man Good news i have picked up a replacement box (cheap) from a blown engine unit that the guy has decided to scrap (now i have to work out how to fit?) will see what people say about it on this site i wonder are there any seals that i must be aware of when changing the box? when i...

Thanks for that its more imfo than i got from the local agents (NZ) who only want to work on the new ones! I have just picked up a second hand box but after reading all the ATF problems i mite try washing out the box with ATF-402 It all runs well till hot about 30 mins then no drive in 4 or 5...

I have changed the fluid but was unaware of any filter will look it up Thanks! but still trying to find out if i can use 75 box or parts if needed? plan to text the solenoids today

Gooday all, I have a 2001 V6 freelander with a slipping gearbox when warmed up (4-5th) after about 40 minutes running will not drive in these gears at all! have read all the very helpful threads on this and am thinking of my next move I have a rover 2001 75 1.8 that i blew the engine on and as...