Urgent help required hawes greenlaning

Simmi
txt me yo position and cb ch number for local help plse

I wouldn't worry about uj remove the prop.

If your going up there blind to weld it then take couple of pieces of 1inch or better still 1.5 inch angle it willallow a temp repair

its all gone quiet.

fanatic said:

I wouldn't worry about uj remove the prop.

If your going up there blind to weld it then take couple of pieces of 1inch or better still 1.5 inch angle it willallow a temp repair

Click to expand...

would do anyway.
bit confused at mo as its been described as trailing arm then radius arm.
just noted that on first or second post it states rear axle, so presume trailing arm at mo!

just texted simmi for details on number he left

rear arm, vague text concerning whats bust!

update from simmi-

i've managed to find a garage. he has a uj and welder. car is crawing down here now so should be ok. if no though i'll give you a bell thanks for all your help so far though

Great news

Was it one of the garages above?

the mad hat man said:

following 2 garages....


Townhead garage
(01969) 667216
town head, hawes, dl8 3rg

stevron auto services
(01969) 667765
1e brunt acres road hawes rural workshop estate, hawes, dl8 3uz

can someone local call them. Save my phone bill

Click to expand...

cheers mate got to stevron geting it sorted thanks for all your help it's much appreciated

So you still got a chance of doing the pass in the Lakes then

Hope you don't miss it

Just got a signel all fixed new brackets fab welded on new uj just got to cap site still laning tomoz big thanks to you all lz rocks

new problem pauls has been welded (pics to follow ) when we have proper signal , now we have a fuel problem anyone got a 300 tdi lift pump near ca17 4lu

Think my lift pump has died...
Ticking from injun bay and will tickover but will not drive more than 30 yards b4 injun revs drop...
We are camped near Kirby Steven .. can collect in mornin if poss..

Help...

What about Dr Evil, doesn't he have loads of stuff and live quite near you

I have sent him a PM for you

Kirkby Steven isn't too far out but I won't be around til tomorrow afternoon at the earliest unless its a real emergency and you need welding still

But if its lift pump the best I can offer is a low pressure 12v feed pump as they're all I have spare

cant offer owt this time afraid, i do have a second hand lift pump, tho i dont know exactly where it is, plus i'm kinda full of guinness.
worst case i do have a trailer for later tomorrow......

we are trying and hoping for something on ebay fingers crossed or we will be recovering it later

Bit of a LZIR dead zone up there

theres more people up here who could go onto it looking at members list…….but no ones signed up

Don't forget LZIR is an emergency service, not a spares repository.
It's not designed to save yu having AA cover

Yu are safe, the car is not at risk.