td5 chassiss treatment
- Thread starter dmjb
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
cambridgecockney
Active Member
- Posts
- 714
Does anyone know the best way to treat the inside of the chassiss.As i am gearing up to do it when weather and time pemit.I have jenolite wire
brush drill bits and por15.But what to do about inside.
you need one of these or similar WAXOYL High Pressure Sprayer spray gun lance | eBay
use it to spray rust converter inside the waxoyl or what ever you are using.if you take back bumper 4 bolts , you can see down the ends of chassis rails. just inside each rail is a plate has a hole in the middle and the 4 corners removed.get your lance or or pipi throgh center hole as far as you can an d spray as you slowly withdraw.
