98418665
New Member
- Posts
- 127
Bugger - I found another job to add to the list on the Disco.
After a bit of a search on here, I think it may be the steering box output shaft seal?
I also read up on Rave to see what's involved in replacing it.
What should I use to release the ball joint from the drop arm?
Will an ordinary puller do for removing the drop arm from the box?
Are they bastards to get off, & should I even be trying to do it myself?
Thanks.
![ImageUploadedByTapatalk1393611759.305372.jpg ImageUploadedByTapatalk1393611759.305372.jpg](https://www.landyzone.co.uk/data/attachments/49/49809-158b2ea7e24e615503ff3c30d0b5c8cc.jpg)
![ImageUploadedByTapatalk1393611781.631684.jpg ImageUploadedByTapatalk1393611781.631684.jpg](https://www.landyzone.co.uk/data/attachments/49/49810-2b452f952a7cabfd191a9ecd2deba2e3.jpg)
After a bit of a search on here, I think it may be the steering box output shaft seal?
I also read up on Rave to see what's involved in replacing it.
What should I use to release the ball joint from the drop arm?
Will an ordinary puller do for removing the drop arm from the box?
Are they bastards to get off, & should I even be trying to do it myself?
Thanks.
![ImageUploadedByTapatalk1393611759.305372.jpg ImageUploadedByTapatalk1393611759.305372.jpg](https://www.landyzone.co.uk/data/attachments/49/49809-158b2ea7e24e615503ff3c30d0b5c8cc.jpg)
![ImageUploadedByTapatalk1393611781.631684.jpg ImageUploadedByTapatalk1393611781.631684.jpg](https://www.landyzone.co.uk/data/attachments/49/49810-2b452f952a7cabfd191a9ecd2deba2e3.jpg)
Last edited: