daboom
New Member
- Posts
- 3
- Location
- Easter-Ross, Highlands
Thank you for the previous thread re. priming fuel system of Series 3. I had replaced the fuel filter but was struggling to find the hand pump (being a novice landy owner) but after removing the bonnet - very simple and removing the air filter duct I was able to climb inside and follow the fuel lines and wow there was the hand primer. Bled from filter top then the two bleed valves on pump it started! And just came back from a nice run along the lanes of Morangie. Now to tackle the brakes - they pull to the right. So, again thanks for your help
Last edited:
