Rear Propshaft Problem lots of VIBRATION

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Tmo

Active Member
Posts
157
Location
Hampshire
After doing a test run of my 3.9 efi conversion I found a large amount of vibration coming from the rear axle and a lot of violent shaking.

Checked the handbrake housing all free and the rear axle spins freely so took the prop off to inspect and found this:

null-13.jpg


null-12.jpg


Does this mean I need a wide angle propshaft as I've realised that the metal marks is what the noise is???

Your help as always very appreciated
 
It's only happened since I fitted the v8, before when it was a 2.5 N/a there were no problems with it?
 
Oh ok I know what you mean now.

Do I need to replace both front and rear James?

The only ones I can find are like £250 each cant afford that??
 
Well after going to see the helpful guys at Keith Gott it turns out a wide angle v8 rear prop is a good 2 inches longer than an n/a one so I've ordered a wide angle n/a one hoping this will solve the problem and will update once fitted

Hopefully it's just the one as they are the best part of £160 each!!!
 
Back
Top