Dorset Ranger
Active Member
- Posts
- 108
Thanks saint,
V helpful
V helpful
P38 Remote, central locking and receiver brick wall.
- Thread starter Dorset Ranger
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
Key Fob sends a three part code to RF receiver, this is read by BECM. IF the code matches what the BECM has stored doors unlock and alarm is turned off. Think you need to get someone with a Nanocom or similar on it. Had this problem or something like it with a motor i went out to a couple of weeks ago. It would not take EKA properly until it was put in with diagnostic unit. You cannot re sync keys when alarm is active.
Dorset Ranger
Active Member
- Posts
- 108
Ah! Do you think hawkeye will cut it?
- Posts
- 16,475
- Posts
- 58,170
- Location
- Preston Lancs.
First thing he has to do is get rid of "Engine disabled" message by turning alarm off. Then he can re sync his keys. Then and only then, if car will not start, needs to re sync BECM to ECM. Key Fob code, EKA code and Security code in ECM are three totally different things. EKA code overrides Fob code to disable alarm when Fob signal is lost. Only with alarm disabled can key Fob be re synced to car. BECM to ECM loss of sync is a separate issue altogether.
- Posts
- 16,475
- Posts
- 16,475
Datatek
Well-Known Member
- Posts
- 44,033
- Location
- Near Poitiers SW France
The fact that FOB locking and unlocking was intermittant before all this started may mean the RF receiver is duff even though it is the latest version. I would try to beg borrow or steal a known working one just to eliminate that possibility.
- Posts
- 58,170
- Location
- Preston Lancs.
I Know...!!Read Post #100
Sorry Ant i am trying to sort a laptop out for someone at same time. Keep forgetting what i have posted.
- Posts
- 16,475
Sorry Ant i am trying to sort a laptop out for someone at same time. Keep forgetting what i have posted.
Laptops, Range Rovers, Aicraft - is there nothing you don't know how to fix???
As I suggested in Post #95...
Datatek
Well-Known Member
- Posts
- 44,033
- Location
- Near Poitiers SW France
Laptops, Range Rovers, Aicraft - is there nothing you don't know how to fix???
The mans a geniarse
As I suggested in Post #95...
Aye but the simple things often get overlooked
- Posts
- 16,475
Too true on both counts..Aye but the simple things often get overlooked
Dorset Ranger
Active Member
- Posts
- 108
Thanks Thanks Thanks!
Dorset Ranger
Active Member
- Posts
- 108
Hawkeye eta in two hours, fingers crossed it wins in the battel of the becm/rf gremlins :fighting2:!!
- Posts
- 16,475
Good luck DR - let us know how you get on.....
- Posts
- 40,991
- Location
- Westminster
Good luck DR - let us know how you get on.....
The anticipation is worse than the Olympics or the Curious landing.
G~
Datatek
Well-Known Member
- Posts
- 44,033
- Location
- Near Poitiers SW France
- Posts
- 40,991
- Location
- Westminster
Let's hope the Martian Rover is more reliable than a Land Rover
Word is they sending Wammers up on the first manned mission, armed with a hammer and a corkscrew to sort out any breakdown issues.
G~
- Posts
- 16,475
:hysterically_laughi:hysterically_laughi
Back to topic - THE SUSPENSE IS KILLING ME........
- Posts
- 58,170
- Location
- Preston Lancs.
Just the hammer don't need a corkscrew. My tipple comes in screw top bottles.
