Irishrover
Well-Known Member
- Posts
- 5,317
- Location
- La Trimouille, Vienne, France
Hi Folks....I am selling my P38, 4.6, HSE, 1996, Willow Green, 129000 miles, FSH, 12 years MOT's and loads of bills, Taxed and MOT, with NO mechanical, electrical, cooling, suspension or heating faults and complete with a noticeable personalised plate (M**HSE). NEW engine fitted 25000 miles ago. Comes with spare programmed Becm (Belt & braces !!).Looking for around £3000 ONO
A proper entry with pic's will be available at the end of March when we come over to the UK for a few weeks, as we are looking to move back to the UK in the near future.
I also have quite a few new & good used spares and service parts for the car which will be of no use to me when the car has gone.
Front axle casing assembly, brand new, never been used, complete with swivels. It is minus the diff and shafts. Has been stored in the garage under cover.
Front CV joint (New)
Set of upper and lower swivel ball joints (New)
Complete set of engine gaskets, top and bottom ends with all seals (New)
Set of axle and transfer box oil seals (New)
Set of HEVAC Blend Motors, tested and working fine (Used)
Set of exterior lamps (Excl. Headlamps and front fogs)..old type-not clear lens (Used)
GEMS 4.6 ECU (Used)
Qty 3-BECM's H & L level, tested and working (Used)
Various Engine bay relays, tested and working (Used)
Front L.H. door, stripped, with rubbing strips, no damage or rot (Used)
If you need further details etc. drop me a PM
A proper entry with pic's will be available at the end of March when we come over to the UK for a few weeks, as we are looking to move back to the UK in the near future.
I also have quite a few new & good used spares and service parts for the car which will be of no use to me when the car has gone.
Front axle casing assembly, brand new, never been used, complete with swivels. It is minus the diff and shafts. Has been stored in the garage under cover.
Front CV joint (New)
Set of upper and lower swivel ball joints (New)
Complete set of engine gaskets, top and bottom ends with all seals (New)
Set of axle and transfer box oil seals (New)
Set of HEVAC Blend Motors, tested and working fine (Used)
Set of exterior lamps (Excl. Headlamps and front fogs)..old type-not clear lens (Used)
GEMS 4.6 ECU (Used)
Qty 3-BECM's H & L level, tested and working (Used)
Various Engine bay relays, tested and working (Used)
Front L.H. door, stripped, with rubbing strips, no damage or rot (Used)
If you need further details etc. drop me a PM
Last edited:
