P38 heat sheilds

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
P

palace

Active Member
Posts
739
Hi All has any one got a set of exhaust heat shields for sale ? the type that go round the manifold ?
its a 4.0 2002 Rangy V8
 
wammers said:
It maybe a very good idea.
Click to expand...

OK. I'm only asking because I don't know, but is it important I refit them?
I know the clue's in the title and they're there to shield the heat; but on the drivers side all the leads are clipped out of the way of the manifold, and on the passenger side I've put heat shield inderneath the maf and plastic air intake gubbins (or of course it would melt). What else should I be concerned about?
They've been left off for nearly 2 years with no problems.
 
kevwill said:
OK. I'm only asking because I don't know, but is it important I refit them?
I know the clue's in the title and they're there to shield the heat; but on the drivers side all the leads are clipped out of the way of the manifold, and on the passenger side I've put heat shield inderneath the maf and plastic air intake gubbins (or of course it would melt). What else should I be concerned about?
They've been left off for nearly 2 years with no problems.
Click to expand...

Land Rover certainly wouldn't have fitted them if they weren't needed. Just think how much money they would of saved :)
 
I threw mine in the bin when I did my heads, finger slicing things to get out. If I was doing long trips I would just wrap my manifold in some special tape I have.
 
You must log in or register to reply here.

Similar threads

NowayPedro
Su carb heat shielding
Replies
18
Views
761
hef19898
hef19898
A
P38A 2 piece headliner ?
Replies
6
Views
490
Grrrrrr
Grrrrrr
pwood999
P38A GEMS Air Intake Pipe
Replies
0
Views
399
pwood999
pwood999
A
P38A Ball joint press kit
2
Replies
20
Views
1K
Mark Piercy
Mark Piercy
G
P38
Replies
4
Views
935
Mark Piercy
Mark Piercy
Back
Top