2.0_hippo
Well-Known Member
- Posts
- 6,069
- Location
- Hertfordshire
Why buy an Audi key
There all different
Go to the stealers and get the right one lol
There all different
Go to the stealers and get the right one lol
Locking wheel nut key
- Thread starter bigrichw
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
ratty
I'm not special I'm limited edition
- Posts
- 34,277
Take em off with rounded nut removers or an undersized socket.
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
Weld a nut on and undo it buy yourself a new set they should not be done up tight Or grind a slot in it and make a tool it's not so hard if you put your mind to it they are only a deterrent .
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
Looking at your photos even a large splined torq bit hammerd in or a club hammEr and chisel
blackdog1
Active Member
- Posts
- 566
- Location
- staffordshire and Spain.
I bought a new one last year cost just over ten pounds inc VAT. from m.ain dealer
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
And last of all four bolts no more nails let it go hard and hey presto
wil2813
Well-Known Member
- Posts
- 2,324
bmw & late rover are the same i have some will look tomorrow
marmitemania
Member
- Posts
- 90
- Location
- Chelveston Northamptonshire
I Will just add my two peneth, when you get them off throw them in the bin and just replace them with 4 normal wheel nuts, really not worth the bother as anyone who really wants them will have the kit to get them off in seconds, all the cars I have had have been pretty high end and I have took the lockers of all of them and never had any wheels stolen, mind you I dont live in Brixton for example. You will regret leaving them on when you have a puncture and cant undo them because they have stuck or been over tightened by an air gun and they round, just general advise avoid any lockers branded Mcgaurd or similar flower type pattern, I speak as a mechanic that has seen lots of issues with these.
2.0_hippo
Well-Known Member
- Posts
- 6,069
- Location
- Hertfordshire
At least it stops the opportunist thiefs
More of a deterrent than anything
Just don't loose your key and you will be fine
More of a deterrent than anything
Just don't loose your key and you will be fine
Topboy
New Member
- Posts
- 45
- Location
- Plymouth - Devon
What he said!!!
Air chisel sorted my four little beauties out when I had a puncture. Replaced with standard nuts. Happy days.
bigdel
New Member
- Posts
- 142
- Location
- nr Reading, Berkshire
someone suggested the tray under the boot floor. have you lifted the boot floor cover up and looked in there. there's a foam tray with indents for all the bits and bobs like the towing eye etc. my locking wheel nutkey lives in its own little hole in this tray.
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
Ong you still at it, well thanks for letting us all know
2.0_hippo
Well-Known Member
- Posts
- 6,069
- Location
- Hertfordshire
About bloody time ! Lol
Yea go for the 20 inch stormers, I have them fitted to mine, looks the bollocks and the handling was improved vastly over the standard rims
