lorri789
Well-Known Member
- Posts
- 4,657
- Location
- West Stirlingshire
I dropped the sump today and noticed that there are scuffs on each side the cylinder caps. I'm assuming this is the source of the sound. I seem to have good oil pressure and the compression test, dry and wet provided excellent results. There was bugger all metal in the oil in the pan.
Is this fixed by bottom end bearing shells changes or is it the bearing shells on the cylinder caps?
If it's the cylinder ones I might have to bin the vehicle due to time constraints. I was hoping to poke in some shells on the accessible caps.
Is this fixed by bottom end bearing shells changes or is it the bearing shells on the cylinder caps?
If it's the cylinder ones I might have to bin the vehicle due to time constraints. I was hoping to poke in some shells on the accessible caps.