Heater blower spares?

Webley1991 · Jul 24, 2014

Does anyone here know if you can easily get the mounts that hold the fan motor onto the blower duct?

I am talking about the rubber mounts that are like small engine mounts with 1/4" UNF threads. There are three of them on the unit.

I will also need the circular metal clip that holds the fan to the motor as this is badly rusted.

Thanks for any info.

zeaphod · Jul 25, 2014

Webley1991 said:
Does anyone here know if you can easily get the mounts that hold the fan motor onto the blower duct?

I am talking about the rubber mounts that are like small engine mounts with 1/4" UNF threads. There are three of them on the unit.

I will also need the circular metal clip that holds the fan to the motor as this is badly rusted.

Thanks for any info.

This sounds like the mounts between the engine and the radiator cowl. If so, they are widely available. ETC4993 is the part no for later models. I generally use Famous Four for all the harder to find parts.

oxides · Jul 26, 2014

50348 is the part number for the clips. The rubber bits look like 79103 from your description.

Webley1991 · Jul 29, 2014

Thanks for the replies.

I had a look at an original fan unit. That one was held together with pop rivets and flat rubber washers. Someone added the rubber mounts later for whatever reason.

Heater blower spares?

Webley1991

Well-Known Member

zeaphod

Well-Known Member

oxides

Well-Known Member

Webley1991

Well-Known Member

Similar threads