hello
help please td4 manual 54 reg
last year i had a gear change issue when i replaced my master cylinder that when trying to engaged 1st it would kick slightly never got this issue resolved but had about 15 months before my slave gave up, earlier this week i replaced the slave and clutch (what a pain in the rain and on my back).
i have bled all the fluid out so no air in there as it was coming out clear and i used that much fluid to flush it.
now from what i can remember from when it drove before both 1st and 2nd are a bit stiff to engage? they do go into gear but its not a smooth movement, do these suffer with linkage issues?? cars done about 76000 miles and hows best way to tell if it is a linkage issue??
cheers
help please td4 manual 54 reg
last year i had a gear change issue when i replaced my master cylinder that when trying to engaged 1st it would kick slightly never got this issue resolved but had about 15 months before my slave gave up, earlier this week i replaced the slave and clutch (what a pain in the rain and on my back).
i have bled all the fluid out so no air in there as it was coming out clear and i used that much fluid to flush it.
now from what i can remember from when it drove before both 1st and 2nd are a bit stiff to engage? they do go into gear but its not a smooth movement, do these suffer with linkage issues?? cars done about 76000 miles and hows best way to tell if it is a linkage issue??
cheers