Engine earth

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Big Vic

New Member
Posts
214
Location
In Kent under a 90
Hi all, just a quick question, my landy wouldn't start today and I have narrowed it down to bad earth from engine to chassis. The problem is I cannot find where it is, I know I can easily run a new earth but would like to check the existing for peace of mind. Can anyone please enlighten me.
Thanks
 
I had a look early this morning (by torch) and found what could possibly the connection on the n/side engine mounting, there was no wire connected and if there was it has been missing for some time. I guess it has been picking up the earth from some where else and by changing the gearbox a couple of days ago the earthing that it was using has been lost.
I will fit a new earth strap this weekend.
Thanks to all
 
I had a look early this morning (by torch) and found what could possibly the connection on the n/side engine mounting, there was no wire connected and if there was it has been missing for some time. I guess it has been picking up the earth from some where else and by changing the gearbox a couple of days ago the earthing that it was using has been lost.
I will fit a new earth strap this weekend.
Thanks to all

You've been lucky it usually uses the handbrake cable as an earth. which then melts. I just had to rewire half my mates disco after his did this and shorted & melted half his wiring loom.
 
Back
Top