6024kingedward1
New Member
- Posts
- 9
The however bit is that you can hear the motor whirr then the cer-clunk on locking AND unlocking. This seems to suggest the both lock and unlock motors and solenoids are working, but it’s not unlocking. I would have thought if the unlock motor or solenoid was not working, it wouldn’t make the same noises as it does when locking?... So, before forking out for new actuator unit, is there a mechanical component that might have failed to do with the unlocking action?
I had the door panel off today to check for the obvious. Sprayed WD40 in every gap, gave the unit a gentle tap or two in case something had seized, nothing.
Thanks in advance.
I had the door panel off today to check for the obvious. Sprayed WD40 in every gap, gave the unit a gentle tap or two in case something had seized, nothing.
Thanks in advance.