diy tow bar

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
G

griff2

Active Member
Posts
694
Location
STAFFORD UK
hi all

has anyone ever tried to make there own tow bar ?
im sure it cant be hard as long as you can weld and use thick steel

does anyone on here have any plans/drawings with measurements?

cheers
 
Its illegal to use a non EU type approved tow bar etc on public roads anywhere in Europe, otherwise we'd sell ours as tow bars ;)
 
Pity you're so far away, I was giving away atowbar from the wifes Freelander 1 a while back, the guy never sent a courier and I bunged it in the back of the garage.
It was a bought one and only the bit that bolts under the vehicle as I used the rest for an extension to pull my boat out the water.
(wonder how long it will take for the vultures to swoop).
 
there is also another point with tow bars if you buy one new do NOT drill any holes in it or your guarantee is void , and if you are posting one try
Collect plus you print the ticket off and then take it to one of the many places that take them in like Bargain booze they are far cheaper than the post office
 
well seeing you all said it was illegal to make your own for use on road

i went on the old german ebay and bid on a gen landrover one

i won item for equivalent of £50 posted :):):):):):):):)
won it late monday night ,paid for it straight away ,im morning had a email saying had been dispatch,later that day had a email saying item would be at my addy next day between 1030-1200 and to my surprise it arrived at 1030 ,cant get over how quick the item got to me :):):):):):):):) and seeing its second hand it looks pritty darn good in my opinion :):):) just needs a lick of hammer right (maybe )


 
Height adjustment and a hidden away plug socket. Very nice!

I am forever bending my light socket!
 
griff2 said:
well seeing you all said it was illegal to make your own for use on road

i went on the old german ebay and bid on a gen landrover one

i won item for equivalent of £50 posted :):):):):):):):)
won it late monday night ,paid for it straight away ,im morning had a email saying had been dispatch,later that day had a email saying item would be at my addy next day between 1030-1200 and to my surprise it arrived at 1030 ,cant get over how quick the item got to me :):):):):):):):) and seeing its second hand it looks pritty darn good in my opinion :):):) just needs a lick of hammer right (maybe )


Click to expand...

Did you get bolts with it, to bolt it to the chassis. I won one too, but I can't buy the bolts for love nor money. Local bolt place, was gonna charge 10 pound per bolt ;-O
 
got mine from e bay uk including bolts and wiring, for £50 too, but considering it was via a freelander salvage yard around 30 miles from my house, took over a week to get here, go figure
 
You must log in or register to reply here.

Similar threads

B
Reversing lights and reversing sensors
Replies
6
Views
990
GrumpyGel
GrumpyGel
F
Discovery tow bar
Replies
7
Views
1K
Nodge68
Nodge68
xDParis64
VCU test result + Lift Kit
Replies
8
Views
435
xDParis64
xDParis64
F
£300 Freelander project! ... my first ever Land Rover
2 3
Replies
44
Views
3K
pwood999
pwood999
O
L322 4.2 SC AJV8 LPG - Engine Timing kit
Replies
0
Views
589
onebounce
O
Back
Top