Christhevanman5
Member
- Posts
- 86
- Location
- Kent
Hi as anyone go any advice on getting the gearbox back into a discovery 1? It is in at the bottom but have a big gap at the top. Thanks
Discovery 1 gearbox
- Thread starter Christhevanman5
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 41,835
- Location
- East Dorset
If it ain't properly parallel to the flywheel etc, it ain't going in. Pull back and realign. And whatever you do, don't try and pull it in with long bolts or nothing!
But then what do I know?
Jimmy 'll come on and help you!
- Posts
- 21,497
- Location
- In the next Glen
Did you check for play in the input shaft on the box if its worn & sitting low an off centre it wont align properly.
Christhevanman5
Member
- Posts
- 86
- Location
- Kent
No I didn't check that. I just thought it would go straight back in but obviously not
Similar threads
