clock removal
- Thread starter dpm
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
landrovermilfer
Active Member
- Posts
- 469
- Location
- mid wales
pull the switch panel out from underneath the clock , then look in the gap you see 2 spring clips holding the clock in , pull them to one side and yank clock out , mine took a bit of effort but will come
666 george
Well-Known Member
- Posts
- 1,535
- Location
- Essex
I did have a link on how to do it but i can't find it.
I used two pieces of metal credit card size that fit down the sides of the clock and you then just pull it out. The lugs are 2/3" down. Hope that helps
I used two pieces of metal credit card size that fit down the sides of the clock and you then just pull it out. The lugs are 2/3" down. Hope that helps
- Posts
- 83,232
- Location
- Embasinga stocæ
if its a disco1 - its a 509T from Halfrauds or similar.
yu can get pretty LED bulbs that fit anorl.
yu can get pretty LED bulbs that fit anorl.
- Posts
- 83,232
- Location
- Embasinga stocæ
one thing to remember - i think the disco ones are clear, rather than tinted - some online sites have a "disco" version.
stretchie_
Active Member
- Posts
- 476
- Location
- Gloucester
Here you go mate, includes pics
http://www.landyzone.co.uk/lz/f8/how-remove-clock-disco-1-pics-71458.html
http://www.landyzone.co.uk/lz/f8/how-remove-clock-disco-1-pics-71458.html
